UPS F.905 X
SCALE INHIBITOR
GENERAL DESCRIPTION :
The function UPS F. 905 X is to prevents the scale formation in boiler water system phospahte content in UPS F 905 X reacts with calcium hardness and hydroxide alkalinity of boiler water and product hydroxyapahte soft slugge’s which can be removed by blow down by doing so, the precipitation of calcium carbonate scale on heat-transfer metal surfaces can be avoided.
USAGE :
Dosage requirement of UPS F. 905 X depends on a number of boiler parameters and the chemical quality of the feed water. Your UPS Technical Service Representative will provide treatment recommended after thorough chemical analysis of the feed water and surveys of the boiler operation conditions are made
TYPICAL PHYSICAL PROPERTIES
Appearance………………………..………White powder
pH (1 % sol)……………………………………11.6 – 12.2
Bulk Density .…………………………………….1.1 gr/ml
Solubility in water…….……….………about 7% at 20º C
REGULATORY STATUS :
The UPS F. 905 X contains products which have been formulated in compliance with subpart D, section 173.310 of the FDA food Additive Regulations and authorized by the USDA for use in Federally Inspected Meat and Poultry Plants.
HANDLING AND STROGES
Wear eye protection and rubber gloves at all times when handling these products. In ease of eye or skin contact immediately flush affected area with large amounts of water for 15 minutes and seek medical attention. Stroge in area. Close tightly the containers after use.
